2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

instrument cluster

Thread Tools
 
Search this Thread
 
Old Oct 30, 2006 | 05:41 PM
  #1  
red rex's Avatar
Thread Starter
Full Member
Tenured Member 05 Years
 
Joined: Mar 2005
Posts: 79
Likes: 0
From: British Columbia
instrument cluster

for the connection too the box for the lights and rear window defroster and such. is there just one wire that turns on the dash lights/brake lights/running lights? or is there a combination of wires...if so which ones?
Reply
Old Oct 30, 2006 | 06:08 PM
  #2  
red rex's Avatar
Thread Starter
Full Member
Tenured Member 05 Years
 
Joined: Mar 2005
Posts: 79
Likes: 0
From: British Columbia
actually nevermind what i said up above. heres another question. so the white wire with the green line on it i know is the power wire for the connector, but for the second time now it has melted the contact points and the plastic and all of my dash lights and cruise lights shut off. what have u guys done too fix this problem?
Reply
Old Oct 31, 2006 | 07:53 AM
  #3  
JBrotor's Avatar
Junior Member
Tenured Member 05 Years
 
Joined: Apr 2006
Posts: 25
Likes: 0
From: Jefferson, Georgia
Your light switch has either: corrosion on the bulbs, bad solder joint at the connector on the light switch, or you are overloading the parking light circuit with other lights or accessories. You need to have the light switch remanufactured and get a new short harness from the switch to the dash harness.
Reply




All times are GMT -5. The time now is 01:44 PM.