hello

so i installed a lsd and toe eliminators and put on the tires and 1 of them wiggles while the car is still jacked up i can grab it and wiggle it back and forth im sure everything is tight, im not sure if i had this problem before i replaced this cause ive never took off the back tire before, so im wondering what will cause this is the wheel bearing bad? or is the drive axle i got bad?

thanx, any help will be appreciated

 

bump

 

Sounds like a bad wheel bearing to me.

 

When you reinstalled the hub did you put those plastic spacers back on the top bolt.

Get somebody to wiggle the wheel while you are under the car.

James

 

already did that, i did install the plastic piece and the piece which is held on by the 3 big bolts doesnt move what moves is inside of it were the axle slides into the hub, so not sure whats bad in there the bearing or the end of the axle

thanx

 

sounds like ur in the same boat i am in. jst did the same thing to my fc ,but i found out that it is the bearings.

 

http://mazdatrix.com/h86-92bearings.htm



Scroll to the bottom of the page.


That's what you need.