installed another s5 engine into an s4 car, didnt learn the first time(5/6 ports vdi)
11-29-08, 07:49 AM
#1
I "lost" my emissions....
Thread Starter
installed another s5 engine into an s4 car, didnt learn the first time(5/6 ports vdi)
ok so i found a s5 motor and swapped the front cover so now its running in my s4 car. what ways can i properly actuate the 5/6 ports and vdi system.
i dont want to;
wire them open
rig up some electrical system
run a air pump unless its the stock belt driven one.
so what are my options here? theres no way to run them on backpressure correct?
thanks guys.
i dont want to;
wire them open
rig up some electrical system
run a air pump unless its the stock belt driven one.
so what are my options here? theres no way to run them on backpressure correct?
thanks guys.
11-29-08, 12:36 PM
#2
Just buy 2 rpm switches and 2 emissions solenoids and wire them in. If you use the S5 ACV and keep an air pump, you'll already have a nipple to tap into for air pressure. It's really not hard, and it beats the hell out of using exhaust backpressure.
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM
KAL797
Test Area 51
0
08-11-15 03:47 PM