Injectors Setup
#1
Full Member
Thread Starter
Join Date: May 2004
Location: Santo Domingo, Dominican Republic
Posts: 192
Likes: 0
Received 0 Likes
on
0 Posts
Injectors Setup
I have one question... i have 2 x 550cc primary injectors of 13.2 ohms (hi imp)
and 2 x 850cc secundary injectors of 3.~ ohms (low imp)
with ecu n332 this car work perfectly with 4 x 550cc 13.2 ohms (hi imp) this injectors are the stock car injectors...
can this work if I install ressistance in the secundary injectors of 850cc (hi imp) ?
the setup will be 2 x 550cc (hi imp) in primary and 2 x 850cc (low imp) in secundary with ressistance of 10 ohms @10watts...
this will work?
sorry for the english...
and 2 x 850cc secundary injectors of 3.~ ohms (low imp)
with ecu n332 this car work perfectly with 4 x 550cc 13.2 ohms (hi imp) this injectors are the stock car injectors...
can this work if I install ressistance in the secundary injectors of 850cc (hi imp) ?
the setup will be 2 x 550cc (hi imp) in primary and 2 x 850cc (low imp) in secundary with ressistance of 10 ohms @10watts...
this will work?
sorry for the english...
#3
Full Member
Thread Starter
Join Date: May 2004
Location: Santo Domingo, Dominican Republic
Posts: 192
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Mx6-Rx7 Addict
You will need some sort of fuel controller to manage the bigger 850cc injectors.
I don't think that the SAFC will control those, will they?
Mabye RTek??
I don't think that the SAFC will control those, will they?
Mabye RTek??
i hace rtek an one safc but i want know if he injectors will work?
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM