Hey i'm trying to order some injectors that are direct drop ins for our stock fuel rails. I did searching and can't really find anything. I don't want to order the wrong set and all that.. so just making sure. I'm ordering it from RC and they have Peak & hold, and saturated. Do i get the bosch style tops or what? thanks guys

 

The manufacture date of your '88 T2 will determine if you need peak/hold or saturated injectors.
Look in the FAQ's for your injector type info that your looking for.

But to help here is the info straight from the FAQ-

88 13B Turbo, high (saturated) square offset, 550cc, purple, 195500-1370

If you have a solenoid resistor pack located by your air box you will need peak/hold injectors.
If you don't have the resistor box you will need saturated injectors.

The resistor pack looks like this-

http://www.aaroncake.net/rx-7/intake3.jpg

You will need Denso style injectors no matter what though if you want drop in.
The part number for RC engineering injectors ends with a D for denso style.

Are you going with larger injectors?

 

yep upgrading to bigger injectors. RC doesn't carry 720's for some reason, you know where i can get direct drop ins like RCs?

 

good luck finding direct drop-in 720's besides venom's (stay away)

 

****.......I was going to order from tlf. What experience have you had with venom?

John NY

 

greddy/denso 720's are a direct drop in

 

except those in your picture are Peak and Hold and not Saturation... you can tell by the locating tab being centered. The 87.5 and 88 use an offset locating tab... not a centered one.

 

file the tab off, remove the resistor pack. done.

 

so from you're saying, you need saturation and not peak and hold?

 

Or just get the right injectors...

 

If they work they work. Or just get different injector clips... (-.-)

 

he has an 88. he would need to add resistors in (not remove a non-existant resistor pack) unless he has an early production model. I have those exact Greddy/Denso injectors on my 88.

That's why I said there are no "direct drop in" because there are very few top feed injectors rated at more than 550cc.

 

is there anywhere that sells those greddy injectors? I can only find em in 4s. I already found my secondaries, they sell it on RC.

 

Ask Keith@KGParts.com to Modify a set of RC injectors for you,to fit the stock FC fuel rail.He does that you know,besides selling Just the RC injectors.

 

check the sticky thread in the classifieds https://www.rx7club.com/shops-part-suppliers-vendors-206/beware-rx-7-owners-venom-injectors-scam-724847/

KG also Sells high or low 750cc drop in injectors