injector question
#1
pwned
Thread Starter
Join Date: Sep 2005
Location: Northern Indiana
Posts: 1,296
Likes: 0
Received 0 Likes
on
0 Posts
injector question
i have to 550's and 720 secondaries and a 3rd gen fuel pump, will that be enough to hold around 15 psi on a streetported engine. the turbo is a small garrett, slightly larger than the stocker.
#3
pwned
Thread Starter
Join Date: Sep 2005
Location: Northern Indiana
Posts: 1,296
Likes: 0
Received 0 Likes
on
0 Posts
i do too.. but the option of running 720 primaries and 780 secondaries is at at. i think the combined 3000cc of fuel might be able to handle 15psi, but what about the Fd fuel pump?
#4
I dont know that much abotu FD's. whats the lph on the fuel pump? But if your running that much fuel I'd get a walbro 255. Then 15 Psi should be fine. but you need to know the psi max on your turbo. If you dont have an A/F ratio gauge, then get one. No one wnats a lean Motor. especially since you streetported it. All that money to a blown motor.
#5
Daily Used and Abused
iTrader: (1)
Join Date: Dec 2008
Location: South Florida
Posts: 290
Likes: 0
Received 0 Likes
on
0 Posts
im running 14psi on 550 primaries and gslse 680cc on the secondaries with a walbro fuel pump and its running alright, 14psi is my limit after that it runs lean. right now my afr is around 11.4 to 11.6
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM
Skeese
Adaptronic Engine Mgmt - AUS
65
03-28-17 03:30 PM