2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.
Sponsored by:

injector question

Thread Tools
 
Search this Thread
 
Old 10-19-01, 07:45 PM
  #1  
Senior Member

Thread Starter
 
Join Date: Jun 2001
Location: CANADA
Posts: 440
Likes: 0
Received 0 Likes on 0 Posts
injector question

1990 turbo rx7.. intake,fcd, full rb turbo back exhaust including dp.
and 20b cosmo pump..other than that stock motor..

whats the biggest sized injectors i can put on the secondaires before i need a afc? but at the same time wont lean out..

thanks..
Old 10-19-01, 08:11 PM
  #2  
HAILERS

 
HAILERS's Avatar
 
Join Date: May 2001
Location: FORT WORTH, TEXAS,USA
Posts: 20,563
Likes: 0
Received 21 Likes on 19 Posts
Pardon me for butting in and not answering your question, but could you tell me how high your boost is? Please? Not capable of answering the afc.......yet.
Old 10-19-01, 08:14 PM
  #3  
HyperREV.com

 
RX-7 GT's Avatar
 
Join Date: Mar 2001
Location: Oregon
Posts: 1,162
Likes: 0
Received 0 Likes on 0 Posts
you'll need a safc if you go bigger than stock. cause you need to adjust them and your fuel curve with it. the ecu will just think thier stock and run em at that duty cycle.

i would go either 2 720's or maybe even 850's
Old 10-19-01, 08:41 PM
  #4  
Senior Member

Thread Starter
 
Join Date: Jun 2001
Location: CANADA
Posts: 440
Likes: 0
Received 0 Likes on 0 Posts
well im only going to push 10 lbs the most. the pop off valve is set to 10.5 psi.. my situation is.. the guy put in the fuel pump and i dont know what size injectors he put in..he was told by a rx7 specialst that all i need was the pump and bigger injectors.. should i tell him to order in the apex afc?

any thoughts? thanks..
Old 10-19-01, 08:57 PM
  #5  
SOLD THE RX-7!

 
Scott 89t2's Avatar
 
Join Date: Mar 2001
Location: Vancouver, BC, Canada
Posts: 7,451
Likes: 0
Received 0 Likes on 0 Posts
10psi on the cosmo pump is probably fine by itself. no need for injectors. get yourself an EGT gauge and rewire the pump.
Old 10-19-01, 09:16 PM
  #6  
HyperREV.com

 
RX-7 GT's Avatar
 
Join Date: Mar 2001
Location: Oregon
Posts: 1,162
Likes: 0
Received 0 Likes on 0 Posts
i always like to be on the safe side. do you have an a/f or egt gauge? you can probably tell if you need any more fuel with one of those. see how your a/f mixture is around 10psi.

scott89t2: how does the blitz bov sound? loud?
Old 10-19-01, 10:25 PM
  #7  
SOLD THE RX-7!

 
Scott 89t2's Avatar
 
Join Date: Mar 2001
Location: Vancouver, BC, Canada
Posts: 7,451
Likes: 0
Received 0 Likes on 0 Posts
scott89t2: how does the blitz bov sound? loud? [/B]
it's louder then the RB exaust and I'm not running much boost at all. 6-8psi. boost controller is in the mail then it'll be louder.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM
Skeese
Adaptronic Engine Mgmt - AUS
65
03-28-17 03:30 PM
morataya
Microtech
1
08-16-15 09:39 AM



Quick Reply: injector question



All times are GMT -5. The time now is 09:34 PM.