2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

I'm lost...need help!

Old Jul 15, 2008 | 06:51 PM
  #1  
BigPimpin''s Avatar
Thread Starter
Rotary Freak
Tenured Member 15 Years
iTrader: (5)
 
Joined: Sep 2004
Posts: 1,583
Likes: 0
From: Hagerstown, MD
I'm lost...need help!

I've got a 91 t2 with 79.000 miles on it. The car starts up, idles fine, seems normal untill you pull off. I can drive around the block and hammer it, car boosts up and hauls ***, until about the third time and at about 4k it falls on it's face and cel pops on. The car goes into limp mode and runs like ****.

I can turn it off, start it back and cel goes out, car goes back to boost. I've tried 3 different ecu's, 2 boost sensors. What the hell could it be? Is there any other sensor I'm missing?
Reply
Old Jul 15, 2008 | 08:25 PM
  #2  
Johny zoom's Avatar
Rotary Freak
Tenured Member 20 Years
iTrader: (5)
 
Joined: Jun 2002
Posts: 1,549
Likes: 0
From: Va
BRYAN hope all is well

What check engine code are you getting?. I had an issue with a 90 gxl that sounds similar.
See if its the OMP I have one if you want it.
give me an adress.and if all s5 are the same

jOHNY
Reply
Old Jul 15, 2008 | 08:32 PM
  #3  
misterstyx69's Avatar
Retired Moderator, RIP
Tenured Member: 20 Years
iTrader: (142)
 
Joined: Sep 2005
Posts: 25,581
Likes: 136
From: Smiths Falls.(near Ottawa!.Mapquest IT!)
yep ..sounds like Limp Mode..omp problem as Johnny Said..I am sort of Glad That I have an S4..as most of the Guys that Have S5's seem to Run into an OMP problem often..
Reply
Old Jul 15, 2008 | 09:09 PM
  #4  
BigPimpin''s Avatar
Thread Starter
Rotary Freak
Tenured Member 15 Years
iTrader: (5)
 
Joined: Sep 2004
Posts: 1,583
Likes: 0
From: Hagerstown, MD
Originally Posted by Johny zoom
BRYAN hope all is well

What check engine code are you getting?. I had an issue with a 90 gxl that sounds similar.
See if its the OMP I have one if you want it.
give me an adress.and if all s5 are the same

jOHNY

Thanks Johny! Here's the strange thing..it doesn't give a code. You ground the jumper and turn the key on, the light comes on, goes out, then comes on and stays on. Im baffled.
Reply


Thread Tools
Search this Thread

All times are GMT -5. The time now is 10:25 AM.