Ignition switch problem
08-02-17, 12:33 PM
#1
Junior Member
Thread Starter
Join Date: Feb 2017
Location: virginia
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
Ignition switch problem
I'm having issues with my car not starting. I have a adaptronic select ecu the car run running perfectly fine yesterday. But when I tried to start it this morning the ecu was only getting 1.25 volts and I wasn't getting fuel and my fan was not turning on.
so I tied a wire in the ecu where the 12v ignition is wired in and touched it on a 12v source. And my ecu now has full power and fuel pressure is good and my fan is on. but it is still not firing, It cranks but I'm guessing it's not getting g spark.
the ignition switch seems to be working fine but that's the only thing I can think of causing this.
And this has happened before about two weeks ago but randomly starting working fine again. Anyone have any idea what this could be?
so I tied a wire in the ecu where the 12v ignition is wired in and touched it on a 12v source. And my ecu now has full power and fuel pressure is good and my fan is on. but it is still not firing, It cranks but I'm guessing it's not getting g spark.
the ignition switch seems to be working fine but that's the only thing I can think of causing this.
And this has happened before about two weeks ago but randomly starting working fine again. Anyone have any idea what this could be?
