2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

ignition failure?

Thread Tools
 
Search this Thread
 
Old Nov 30, 2004 | 12:19 AM
  #1  
rs_1101's Avatar
Thread Starter
Rotary Enthusiast
Tenured Member 10 Years
 
Joined: May 2004
Posts: 1,088
Likes: 0
From: OC
ignition failure?

k k.. ive been having problems starting my car lately. it acts like its flooded, like if i drive the car, then turn it off for less than 1 hr, starts right up, if it cools down all the way.. starts right up. if i leave it for 2 hrs so its kinda still warm, wont start. and lately, when ive gone to crank it, theres no tac signal, and the car cranks like theres nothing in there.. im guessing its ignition related then right?
is this common? i have to turn the key off, then on to get it to start up. ive checked connections, and everythings hooked up under there..
Reply
Old Feb 13, 2008 | 06:53 PM
  #2  
jeffwt22's Avatar
Junior Member
 
Joined: Feb 2008
Posts: 7
Likes: 0
From: mchenry
IL

mine does the tach thing sometiems too and i fix it the same way, but when it floods i pop the hood and pull the fuze to the injectors then crank it and then put the fuze back and itll start right up, im actually puttin a toggle switch on teh wire so i dont have to go under the hood to cut the power to the injectors
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
WANKfactor
1st Generation Specific (1979-1985)
6
Sep 29, 2015 01:14 PM
GKW
1st Generation Specific (1979-1985)
5
Sep 28, 2015 04:34 PM
subeone
General Rotary Tech Support
0
Sep 24, 2015 09:58 PM
ncds_fc
2nd Generation Specific (1986-1992)
19
Sep 15, 2015 12:03 AM




All times are GMT -5. The time now is 04:04 PM.