2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

Idle problem =P

Thread Tools
 
Search this Thread
 
Old Apr 19, 2007 | 12:41 AM
  #1  
Mutaku's Avatar
Thread Starter
I fix planes...
Tenured Member 15 Years
 
Joined: Jan 2004
Posts: 559
Likes: 0
From: Murica
Idle problem =P

I have an 89 Turbo. Only mod to the car is street port. My issue is this, when I start my car on a really cold day it starts up fine but dies if I don't give it gas for a little bit. Then the car will run at about 600-700 until it gets warm. Now when warm the idle is 1100-1400 as it gets warmer. I can get the idle to go down if I put it in gear and force the idle under 1k and then the car will idle like normal 750-850.

thermowax rod extends and I have tried adjusting the screw and the car won't idle like it is supposed to when cold. Anyone have idea's on what could be the issue/s? There is no other problems with the car it's just annoying ><.
Reply
Old Apr 19, 2007 | 01:52 AM
  #2  
slpin's Avatar
7th Heaven
Tenured Member: 20 Years
iTrader: (9)
 
Joined: Nov 2004
Posts: 3,663
Likes: 4
From: California
if you have 'two' idles like you described - it is vac leak.
it has to do with the vaccum advancing, and the ecu giving fuel

check for leaks and try it again!
Reply
Old Apr 19, 2007 | 10:10 AM
  #3  
Mutaku's Avatar
Thread Starter
I fix planes...
Tenured Member 15 Years
 
Joined: Jan 2004
Posts: 559
Likes: 0
From: Murica
Alright thank you for the info. I had considered a vac leak previously but i wasn't sure. Now gotta make my tester =P
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
barkz
Power FC Forum
37
Nov 21, 2020 09:34 AM
Jeff20B
1st Generation Specific (1979-1985)
73
Sep 16, 2018 07:16 PM
ZacMan
Build Threads
4
Sep 19, 2015 09:20 PM
firzen
2nd Generation Specific (1986-1992)
9
Sep 15, 2015 12:04 PM
rx7shirley
2nd Generation Specific (1986-1992)
6
Sep 2, 2015 02:11 PM




All times are GMT -5. The time now is 03:34 AM.