Idea: Using 2 cycle Injection System from an outboard engine for premix?
#1
STK/A-MKT TII PARTS 4SALE
Thread Starter
Join Date: Oct 2003
Location: Long Island, NY
Posts: 520
Likes: 0
Received 0 Likes
on
0 Posts
Idea: Using 2 cycle Injection System from an outboard engine for premix?
I'm not sure exactly which company it is, but one company that makes outboard engines (i think Suzuki) has a 2cycle injection system where a 2 cycle tank mounts remotely from the engine and is pumped into the fuel lines just before the injectors with a tee. The mix that the pump makes is adjustable. If i could get my hands on one of these systems...should I give it a try?
#2
There already exists a company that makes an adaptor that fits between the MOP and the front cover. It gives you an outlet to run tubing to a tank where you put 2 stroke. There was a post a couple of weeks ago from someone saying the system wasn't as good as it looks. A search should turn it up.
Your idea seems that it would work, but would ba a lot of trouble since its already commercially available.
Your idea seems that it would work, but would ba a lot of trouble since its already commercially available.
#4
Compression Tester Guy
iTrader: (3)
Join Date: Apr 2003
Location: Houston, TX
Posts: 1,010
Likes: 0
Received 0 Likes
on
0 Posts
http://www.rotaryaviation.com/oil_in...p_adaptors.htm - PCV Technologies MOP adapter
-or-
https://www.rx7club.com/showthread.p...9&page=1&pp=15 - Patman's write-up on how to modify your stock MOP.
-or-
https://www.rx7club.com/showthread.p...9&page=1&pp=15 - Patman's write-up on how to modify your stock MOP.
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM