JamesBong

I've been searching like crazy, but all I can find is replacing an NA with a turbo. I have a working NA I want to put into this turbo untill I can rebuild the engine. They are both S4's. is there anything I need to watch out for? Are the wireing harnesses and ECU's interchangeable. Any help would be appriciated.

JamesBong

oh, one more thing, when doing the swap, would I use the flywheel and counterweight from the turbo, or should I get one from an NA?

Aaron Cake

iTrader: (1)

This thread is being closed because this topic is either covered in the FAQ or has been covered many times before. It is suggested that you make use of the search feature and read the FAQ to find your answer. If you still cannot find what you are looking for, then feel free to post your question indicating that you have already looked for an answer, and someone will probably be happy to help.

Please be aware that this forum has been around for quite a while, and almost every common question has been covered many times in the past. All this information is available by using the search function. Common questions are also already answered in the FAQ.

Some of the questions covered in the FAQ include:

-NA to Turbo conversions
-Electrical problems
-Stereo wiring
-Wheel sizes
-Stock HP and torque specs for all models
-Common abbreviations
-Common electrical problems
-much, much more

The 2nd Gen Forum also keeps an Archive of popular and informative posts. You can access this archive by using the links at the top of this forum.

Helpful links:
-FAQ: https://www.rx7club.com/forum/showthread.php?t=181219
-Search: https://www.rx7club.com/forum/search.php
-Archives: https://www.rx7club.com/forum/forumdisplay.php?f=72

Thank you,
The Moderators