I really really really need someone to teach me to disassemble the power window motor mechanism so that i can put my window up manually i know wha efveryhting is i just don tyknow how to get it up by hand some one please help im sick of m the inside of my car getting wet its ruining it

 

Remove the two bolts that hold the window to the regulator. Push window all the way up, and install a clamp inside the door to hold it tightly up.

 

Explain man whatyou really mena by a clamp what kinda clampp and where?

 

Anything that will fit...Some kind of small C clamp will probably work. Just to hold the window up temporarily...You could also shim with a piece of wood as well.

 

No i have nohting thats small enough ineed antioher option on dissaembling the cirle that holds hte beads

 

Disassembly isn't an option if I am picturing the regulator properly in my mind...Have you tried connecting 12V directly to the motor to see if you can move the window? It may just be your switches that are bad.

Otherwise, you have no choice but to use a small clamp (check a hardware store) or replace the regulator.

 

my dad fixed it my motor had high resitnace it was taost my dad been a mechainc for 28 year hes fixed it by dissasembling it