2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

I need Help!!

Thread Tools
 
Search this Thread
 
Old Apr 2, 2009 | 08:21 AM
  #1  
KoleDeRacer's Avatar
Thread Starter
Junior Member
 
Joined: Mar 2009
Posts: 16
Likes: 0
From: texas
I need Help!!

Well i just got my 1988 turbo 2 sort of running and i need help on finding out what its problems are. here is what its doing
1.Its starts ok form cold and it might ideal.
2.Once it is warm it will usually not restart off of the starter. It will just keep turning over. and if you hold it wide open it will kinda sputer but not start.
3.It will not ideal at all.
4.It seems like it has no power. especialy down low. as you pull throught the revs it kinda gets hung up around 4k. then pulls on up after that. No bottom end at all
5. It back fires alot. More on decel but just in general it will any time. seems like its running rich all the time.
6. smokes some times at cold start up and just occasionally.
Reply
Old Apr 2, 2009 | 08:40 AM
  #2  
NOLA RX-7's Avatar
Full Member
Tenured Member 10 Years
 
Joined: Oct 2007
Posts: 105
Likes: 0
From: Florida
Check the timing....
Reply
Old Apr 2, 2009 | 08:42 AM
  #3  
KoleDeRacer's Avatar
Thread Starter
Junior Member
 
Joined: Mar 2009
Posts: 16
Likes: 0
From: texas
ok. how on this engine?
Reply
Old Apr 2, 2009 | 08:49 AM
  #4  
NOLA RX-7's Avatar
Full Member
Tenured Member 10 Years
 
Joined: Oct 2007
Posts: 105
Likes: 0
From: Florida
well you need a timing gun prefer 2 cycle if you get one 4 cycle yost divide the # in 2 and that is your timin. Check the right timing i dont have idea wath is the timing.
http://rx7city.com/89-91manual.htm
Reply




All times are GMT -5. The time now is 12:42 AM.