I need help!
#1
Full Member
Thread Starter
Join Date: Sep 2001
Location: right next door
Posts: 101
Likes: 0
Received 0 Likes
on
0 Posts
I need help!
I'm rebuilding a 13b in my trans tech class. and i have one question
How do you get the huge socket or nut off?
It's the nut or socket that holds the flywheel on?
How do you get the huge socket or nut off?
It's the nut or socket that holds the flywheel on?
#2
MazdaTrix has a BFW...big F'n wrench for that. It is actually cheaper than buying the huge 2.125" socket and 3/4 inch drive to run it. It also comes with a metal strap that you can drill 2 holes in so the flywheel will be more secure and not move. If your engine is like the last 2 I have done, you may want a sledge, aka BFH, to get more force on the big wrench. Hope this helps.... Mazdatrix part number is 49-22000 ~$36.
#3
I came, I saw, I boosted.
Join Date: Apr 2001
Location: Windsor, Ontario, Canada
Posts: 1,921
Likes: 0
Received 0 Likes
on
0 Posts
That pretty much answers it.... Big ***** F*cking Wrench.
I may be very wrong but I believe it's something like 350 lb/ft of torque on it...
Just have some means to immobilize the flywheel.
I may be very wrong but I believe it's something like 350 lb/ft of torque on it...
Just have some means to immobilize the flywheel.