misterstyx69

iTrader: (142)

Please guys,NO Search.I have been ripping at this car for two weeks,Every Day.
I have the Front Bumper off,changing it out to a KIT,and I need PICS of the Intercooler install and where to Cut the Holes for the Piping.I am going to Run the Power steering.
I have 2 intercoolers to Choose From..1:. 3" in and out 26 x10 x3.5(I believe) .Big *** cooler.
the other one is a angled inlet with a Top Exit going across the Intercooler.(like same side Pipe..Passenger side I think.).
Anyways,I need Pictures of the Mounting of the IC.What did it Bolt up to.HOW?.( I don't need my Front Fiber Bumper.I have a Aluminum Bumper.
OH,I would like to KEEP My Flip up Lights,Not have them UP or at least be able to Sleepy eye them Down.
Please Post info.Thanks Guys,I don't ask for much!.STYX!~

Boosted11

iTrader: (11)

Here's a greddy fmic install, gives you an idea.

https://www.rx7club.com/showthread.p...ht=greddy+fmic

87 t-66

iTrader: (133)

no sleepy eyes dave!

mo-powah

i just got a 32x12x3 inch and i plan on putting it where the oil cooler goes. just find out where u want it, make brackets, and then route pipes.

87 t-66

iTrader: (133)

you plan on putting it "where the intercooler goes"? thats some great advice

mo-powah

edit i ment the oil cooler

Rob XX 7

iTrader: (8)

where are you going to put the oil cooler??

the red car picture shows all you need to know in regards to where to cut your holes.

misterstyx69

iTrader: (142)

I got a Brain storm Idea Today..Went Right NUTS on the Car.
I was able to Take the Front Bumper off.Cut some ****.mounted the Intercooler basically where 87 t-66's is..
I found out alot Of **** today..Like the car is made of THIN Stuff..ZIP..Cutting disc!..
OH..WHY is Every Pic of an Intercooler Setup always With the Front Bumper OFF?.it looks like it won't go back On.,(looks horrible,Naked!)..LOL.

AGreen

iTrader: (11)

I had to:
1) Relocate the battery to underneath the convertible top
2) Relocate the fuse block
3) Loosen the power steering lines at the PS pump
4) Loosen the mounting bracket on the firewall for the AC line
5) Relocate the purge solenoid

You can see the holes I had to cut, and a couple revisions I went through, but all and all, it's pretty easy to see what I did.

Rob XX 7

iTrader: (8)

you can look at any pictures on the forum for cars with thier FMIC and thier bumper on, when asking for where to cut pictures it makes more sense to see them with the bumpers off doesnt it?