I sold my turbo timer and i'm fixing to take it out of my car. However I did not install it, but do know it has one of those 10 dollar wire harnesses to make things simple. What's the best advise/help you can give me to taking it out and making my car start up normal when i'm done. thanks!

marshall

 

The easiest thing to do it to match up wire color to wire color.

 

ok, will there be a plug that's not connected to anything that will go back into the spot the harness is in for the tt?

 

the harness is just inbetween the stock one.. so you unplug the middle one and plug the 2 ends back together.



-----a b------c d-------

unplug the a/b and the c/d and plug a and d together.

there are probably 2 of them total (4 plugs). so you'd have to do it twice. just do one at a time so you don't mix them up

 

who makes those harneses?

 

Trust, hks, apexi etc. Basically anyone who makes turbo timers. I believe the hks/apexi/trust harnesses are all interchangable between turbo timers too. Trust is the cheapest Ive seen so far.