How To's, what would you guys like to see??
#26
Senior Member
Join Date: Jan 2002
Location: Key Largo, Florida
Posts: 253
Likes: 0
Received 0 Likes
on
0 Posts
How about a missing blow off valve. Im missing it completely. There big hose that I guess comes out of the intake is just clamped off with a cork. The little nub on the fender that black plastic piece that comes to a point for a vacume line is always shut. The vacume advance in the rear on the passanger side also blocked. What the heck??????
#28
Super Newbie
Originally posted by warp0007
How about a missing blow off valve. Im missing it completely. There big hose that I guess comes out of the intake is just clamped off with a cork. The little nub on the fender that black plastic piece that comes to a point for a vacume line is always shut. The vacume advance in the rear on the passanger side also blocked. What the heck??????
How about a missing blow off valve. Im missing it completely. There big hose that I guess comes out of the intake is just clamped off with a cork. The little nub on the fender that black plastic piece that comes to a point for a vacume line is always shut. The vacume advance in the rear on the passanger side also blocked. What the heck??????
#29
Super Raterhater
iTrader: (6)
Join Date: Dec 2001
Location: NY, MA, MI, OR, TX, and now LA or AZ!
Posts: 10,624
Likes: 0
Received 2 Likes
on
2 Posts
automatic -> manual
manual -> automatic (one guy was crazy enuf, why not!)
NA -> t2 (engine/ecu)
NA -> T2 (driveline)
sunroof repair
wiper testing/repair
water treatment(instead of ATF)
turbo installation
how to use the search function (definatly a NEEDED howto!)
Just what I think
manual -> automatic (one guy was crazy enuf, why not!)
NA -> t2 (engine/ecu)
NA -> T2 (driveline)
sunroof repair
wiper testing/repair
water treatment(instead of ATF)
turbo installation
how to use the search function (definatly a NEEDED howto!)
Just what I think
#31
How-To:
1) learn to type correctly
2) learn to spell
3) take off caps-lock
4) press the "Search" button on the top-right of the screen
5) put on trousers one leg at a time in the correct order
just off the top of my head
1) learn to type correctly
2) learn to spell
3) take off caps-lock
4) press the "Search" button on the top-right of the screen
5) put on trousers one leg at a time in the correct order
just off the top of my head
#32
I think that he's talking about n/a modifications, not fixing things like sunroofs and stuff. I know you guys are asking for a write-up (not neccessarily from Agent D even) but I think thats what he had in mind with the write-ups
there are a lot of different techniques to it that are to be used in different situations. I'm going to give you some basic and safetly advice. go find a remote parking lot first of all to learn in. don't try it on the street right away because you'll be likely to break something on your car or injure an animal/person or something (it'd be good to try in the rain since its a lot easier to break traction and is nicer on the tires). in the parking lot pull away from the corner (possible to brake while doing it) and once the the weight transfers to that side pull HARD into the corner and press down on the gas. once the back end goes out pull the wheel back the other way (countersteer). I hope this is helpful. if it doesn't make sense then I blame it on it being almost 3 am. if you like drifting you should check out this new drift forum that started a little bit ago.
www.driftcore.com
there are people here who will be able to explain it a lot better than me. there are even a few drifters from japan there.
good luck.
Originally posted by FoXX
how to:
drift
how to:
drift
www.driftcore.com
there are people here who will be able to explain it a lot better than me. there are even a few drifters from japan there.
good luck.
#33
Full Member
Join Date: Mar 2001
Location: The Netherlands
Posts: 96
Likes: 0
Received 0 Likes
on
0 Posts
Custom gauge faces
I was planning on making a howto for custom gauge faces in the near future. Allmost finished my new gauges (see other post). This will be merely be a howto on computerdrawing, scanning and printing, but nevertheless some people mind find it usefull. Just let me know...
Marco.
Marco.
#36
Rotary Enthusiast
Join Date: Sep 2001
Location: Pittsburgh Pa
Posts: 1,417
Likes: 0
Received 0 Likes
on
0 Posts
brakes
i would just like to say that i DID search for this and i came up empty handed. im looking for a write up on how to do a caliper rebuild four piston and single. does neone know of a site with one? or can someone type one up?i have the parts i just need some info.
thanks
pinfiled
thanks
pinfiled
#40
Law Breaker
Join Date: Oct 2005
Location: S.F. Bay Area, California 510
Posts: 3,333
Likes: 0
Received 0 Likes
on
0 Posts
wow, it's funny how ppl are asking the same damn questions 4 years later. what's ever worst is lately some of these topics have been covered with great detail and the threads are just left to die... not even to become a sticky!
Thread
Thread Starter
Forum
Replies
Last Post
Kruel13
1st Generation Specific (1979-1985)
24
09-16-15 09:08 AM