Hello, I am trying to figure out how to take off the front bumper of my 86 rx7 na so i can put the rest of the body kit on. Pictures would be very helpful

Thanks!

 

There's about 8 nuts to remove on the sides that you get to by pulling the inner fender liner out. Then however many bolts are on the bottom. The turn signals unscrew and the bulb harness can be unplugged. Simple job.

 

Three nuts via removing the inner fenders on each side.
One nut via opening your headlights on each side next to the fenders
all the nuts along the top of the bumper you access by opening your hood
Bunch of nuts along the bottom. Easiest if you remove the stock lower lip.
All 10Mm nuts except along the bottom for the lower lip.
Be sure and unplug the parking lights before you pull the bumper.