How do you use the "Rear Camber Adjuster"?
07-07-08, 11:32 AM
#1
Full Member
Thread Starter
iTrader: (1)
Join Date: Jan 2008
Location: Phoenix
Posts: 111
Likes: 0
Received 0 Likes
on
0 Posts
How do you use the "Rear Camber Adjuster"?
I have this model:
http://www.mazdatrix.com/getprice.as...m=04-7421-0000
but don't know how to use it since it came with the car. I have tried to adjust it myself but the thing won't budge so I must not be doing something right. The way I tried was to loosen locknuts and have no pressure on the rear end at all. Just let it hang. Maybe I need to have pressure on a part of th rear end it adjusts?
Thanks all,
Ben
http://www.mazdatrix.com/getprice.as...m=04-7421-0000
but don't know how to use it since it came with the car. I have tried to adjust it myself but the thing won't budge so I must not be doing something right. The way I tried was to loosen locknuts and have no pressure on the rear end at all. Just let it hang. Maybe I need to have pressure on a part of th rear end it adjusts?
Thanks all,
Ben
07-07-08, 08:43 PM
#2
Senior Member
iTrader: (1)
Join Date: Oct 2007
Location: Nova Scotia, Canada
Posts: 568
Likes: 0
Received 0 Likes
on
0 Posts
It is very simple to use. You just loosen the lock nuts and tighten or loosen the main section. If you have loosened both lock nuts and it won't turn then chances are it is a little seized and you may want to uninstall it to try to loosen it up.
Thread
Thread Starter
Forum
Replies
Last Post
