how do i hook up the fuel lines
#1
Full Member
Thread Starter
Join Date: Mar 2008
Location: AZ laveen
Posts: 112
Likes: 0
Received 0 Likes
on
0 Posts
how do i hook up the fuel lines
im not to sure how to hook up the fuel line on an 87 rx7 na all the lines are ran to the motor but there not hooked up can any one help me.
#2
Full Member
iTrader: (2)
Join Date: Mar 2008
Location: Fort Collins
Posts: 219
Likes: 0
Received 0 Likes
on
0 Posts
a manual with diagrams is very helpful for things like this. you should get one. anyway i digress.
fuel feed line from the fuel filter goes to the pulsation damper on the primary fuel rail. then from primary rail to secondary rail. then from fuel pressure regulator to return line back to tank.
fuel feed line from the fuel filter goes to the pulsation damper on the primary fuel rail. then from primary rail to secondary rail. then from fuel pressure regulator to return line back to tank.
#4
NASA-MW ST4
iTrader: (7)
a manual with diagrams is very helpful for things like this. you should get one. anyway i digress.
fuel feed line from the fuel filter goes to the pulsation damper on the primary fuel rail. then from primary rail to secondary rail. then from fuel pressure regulator to return line back to tank.
fuel feed line from the fuel filter goes to the pulsation damper on the primary fuel rail. then from primary rail to secondary rail. then from fuel pressure regulator to return line back to tank.
#5
Turbo power, activate!
iTrader: (7)
Red line is from fuel filter to Pulsation damper.
Yellow line is from the end of the primary rail to the beginning of the Secondary rail.
Green is from the Fuel regulator on the Secondary rail to the fuel return line.
Of course, this is a direct connection. If you still have the rats nest, then there would be other lines along the way, but they still go to the same place.
Yellow line is from the end of the primary rail to the beginning of the Secondary rail.
Green is from the Fuel regulator on the Secondary rail to the fuel return line.
Of course, this is a direct connection. If you still have the rats nest, then there would be other lines along the way, but they still go to the same place.
#6
Have RX-7, will restore
iTrader: (91)
are you talking about the fuel supply and return lines? this may help. from the FAQ:
I don't want to buy a shop manual for my car, is there a place where I can still find out the information from one
Shop manuals for both series can be found on-line at:
http://www.cochran-racing.com/FSM/index.html
http://208.62.166.66:82/guest/shop_manuals/
OR
(86-88 only)
http://www.teamfc3s.org/main/factory...ual/1986_1988/
and (89-91 only)
http://www.teamfc3s.org/main/factory...ual/1989_1991/
S5 Wiring Diagrams:
https://www.rx7club.com/forum/showthread.php?t=530860
Where can I find the dealer fiche/parts catalog?
http://www.mazdamotorsports.com/pages/cats/rx7pubs.html
I don't want to buy a shop manual for my car, is there a place where I can still find out the information from one
Shop manuals for both series can be found on-line at:
http://www.cochran-racing.com/FSM/index.html
http://208.62.166.66:82/guest/shop_manuals/
OR
(86-88 only)
http://www.teamfc3s.org/main/factory...ual/1986_1988/
and (89-91 only)
http://www.teamfc3s.org/main/factory...ual/1989_1991/
S5 Wiring Diagrams:
https://www.rx7club.com/forum/showthread.php?t=530860
Where can I find the dealer fiche/parts catalog?
http://www.mazdamotorsports.com/pages/cats/rx7pubs.html