What wires do I jump to charge the fuel system... I just finished installing my new system under the hood and I need to check for leaks... And yes I searched with no luck...

 

just crank the engine for a sec and it will start squriting.. other than that i know there is a jumper up front but i dont remember which one it is

 

I dont want to crank over the engine since various other parts are removed... The jumper thing is what I was talking about... Does anyone know how to prime the fuel system using the jumper...?

 

There is a 2 pin fuel pump jumper connection in the front of the right side strut tower. I believe it's yellow, but it's been a while since I've used it, and the car is in the garage under a cover. Checked the S5 FSM, they say it's yellow.

 

Its a yellow two pin connector that sits by the pass side strut tower. Jumper it and when the key is on, the pump will run. No cranking required. Makes a great leak checking tool.

 

Thanks... Thats what I thought... I just did not want to go jumping wires without knowing for sure...

 

Yup, you got it. It sits just below your intake to the left a bit.