how can i remove the power window switches?
#1
Livin loud like TIMMAAAYY
Thread Starter
Join Date: May 2002
Location: Roper, North Carolina
Posts: 1,451
Likes: 0
Received 0 Likes
on
0 Posts
how can i remove the power window switches?
how can i get to the power window switches so that i can clean the contacts inside them? i want to try that before i fork over the cash for new ones
#3
hehe if i can recall correctly...just pop em out with a screw driver...i think from front to back or back to front...there is a clip that holds it there but fairly easy to pop it out...no screws! hope it helps otherwise remove the panel and like NZ said..."it will be revealed"
Fred
Fred
#4
"Just Looking".......
Join Date: Jul 2001
Location: Treasure Coast, FL
Posts: 521
Likes: 0
Received 0 Likes
on
0 Posts
1. remove the door panel
2. unplug the wiring harness from the switch
3. push the switch up thru the TOP of the armrest (it's clipped in)
If you try prying it out w/o taking off the door panel you're going to break/chip something.
2. unplug the wiring harness from the switch
3. push the switch up thru the TOP of the armrest (it's clipped in)
If you try prying it out w/o taking off the door panel you're going to break/chip something.
#5
Originally posted by BadBoy
hehe if i can recall correctly...just pop em out with a screw driver...i think from front to back or back to front...there is a clip that holds it there but fairly easy to pop it out...no screws!
hehe if i can recall correctly...just pop em out with a screw driver...i think from front to back or back to front...there is a clip that holds it there but fairly easy to pop it out...no screws!
-RexMan
Thread
Thread Starter
Forum
Replies
Last Post