2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.
Sponsored by:

HOLY SH**** Fuel going everywhere!! Need help

Thread Tools
 
Search this Thread
 
Old 04-12-05, 07:10 AM
  #1  
Rotary Enthusiast

Thread Starter
 
RylAssassin's Avatar
 
Join Date: May 2002
Location: Boston
Posts: 1,203
Likes: 0
Received 0 Likes on 0 Posts
HOLY SH**** Fuel going everywhere!! Need help

Ok well first off its good to be back. I havent been around now for quite some time because i havent had my car now for 6 months.
Anyway i have been working on a whole slew of stuff and just this past sunday finished everything i was doing.

I worked on my fuel system, intake system, and vac system. IE the most basic, fuel filter, replaced some lines cleaned a lot, got injectors cleaned etc etc etc. Basically i took apart the whole fuel system as well as other ****.
But now i have a major ******* problem that ive never seen before.

I went to start up my car for the first time in 6 months and after performing all these repairs. So when i go to start the car it would turn over and want to start but nothing.
Then when i stoped i hear this pouring noise comming from my engine bay and all i see is fuel EVERYWHERE. And it was comming from this black canister which i thought was the charcole canister on the left side of the engine bay just in front of the cold start system. It was pouring out of a black tube comming from the bottom. Guys this is ******* wierd ive never seen this before what could cause this??? Check my sig i do have many mods including the Walboro fuel pump which i did hear while this was happening

PLEASE HELP!!
Old 04-12-05, 07:16 AM
  #2  
Mechanical Engineering

 
capn's Avatar
 
Join Date: Jun 2004
Location: South Carolina
Posts: 1,618
Received 25 Likes on 16 Posts
are you sure you did not connect a line were it is not supposed to go?
Old 04-12-05, 09:26 AM
  #3  
Rotary Enthusiast

Thread Starter
 
RylAssassin's Avatar
 
Join Date: May 2002
Location: Boston
Posts: 1,203
Likes: 0
Received 0 Likes on 0 Posts
Yeah i got it. I swaped the charcoal line with the fuel return line so instead of the fuel going back to the fuel pump it was going through the charcoal canister LOL. Dumb and you know i that damn vaccum diagram isint accurate cuz it shows it the way i had it when in fact its opposite.

Sorry i panicked

Hey new problem now though, cranking no start. I pulled a plug and its completly fouled im going to replace them and see what happens.
Old 04-12-05, 11:53 AM
  #4  
Mechanical Engineering

 
capn's Avatar
 
Join Date: Jun 2004
Location: South Carolina
Posts: 1,618
Received 25 Likes on 16 Posts
Originally Posted by RylAssassin
Yeah i got it. I swaped the charcoal line with the fuel return line so instead of the fuel going back to the fuel pump it was going through the charcoal canister LOL. Dumb and you know i that damn vaccum diagram isint accurate cuz it shows it the way i had it when in fact its opposite.

Sorry i panicked

Hey new problem now though, cranking no start. I pulled a plug and its completly fouled im going to replace them and see what happens.
flooded?
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
rgordon1979
3rd Generation Specific (1993-2002)
40
03-15-22 12:04 PM
bryancmatthews
Power FC Forum
14
10-05-15 08:49 PM
sherff
Adaptronic Engine Mgmt - AUS
5
09-12-15 12:22 PM
Steven_McKinley
General Rotary Tech Support
12
09-05-15 10:48 AM



Quick Reply: HOLY SH**** Fuel going everywhere!! Need help



All times are GMT -5. The time now is 03:07 PM.