high rpms hesitations....
Thread Starter
Joined: Nov 2002
Posts: 12,752
Likes: 1
From: Laredo, Tx
OH yeah the car gets really dusty every month or so since laredo where I live is basically a desert! So sorry about the dust particles in there. But they aren't stuck on the contacts so I doubt it would be the root of the problems.
Last edited by 1987RX7guy; Dec 2, 2003 at 11:12 PM.
Thread Starter
Joined: Nov 2002
Posts: 12,752
Likes: 1
From: Laredo, Tx
Originally posted by Sesshoumaru
i would consider the fp (maybe not enough volts?).
I would check on that pill. My s4 TII isn't running one now atleast
i would also check timing also........and like suggested.....just make sure everything is up to snuff.
just throw'n ideas out
i would consider the fp (maybe not enough volts?).
I would check on that pill. My s4 TII isn't running one now atleast
i would also check timing also........and like suggested.....just make sure everything is up to snuff.
just throw'n ideas out
FP?=Fuel pump? Hum I may look into getting another pump. Where do they sell OE pumps? or a good aftermarket that drops in would be killer.
Would all that is needed for this be a Fuel Pressure guage? How would I use it on a stock fuel system. Well I am not really 100% stock because I have the emmissions rack removed but I stil have the rails and 460's etc..
mad scientist
Joined: Feb 2001
Posts: 2,665
Likes: 2
From: Savannah, GA
Dont waste your time replacing the pump. When they start to go bad, you will know it. They get loud, and they start pumping WAY more fuel. Your idle will go to ****, and you will smell a very strong gas smell.
Always replace the consumables before troubleshooting expensive parts that dont fail often.
Have you regrounded the ECU? If not, its worth doing.
Always replace the consumables before troubleshooting expensive parts that dont fail often.
Have you regrounded the ECU? If not, its worth doing.
Rotary Enthusiast
Joined: Dec 2002
Posts: 1,228
Likes: 0
From: Darwin, NT, Australia
Those plugs lokos fine to me but if you want to be sure, next time it starts playing up, stop the car, wiggle those connections and go for another drive, see if it fixes it or not.
but as Mazdaspeed7 said check for proper grounding..
not just the ECU but in the engine bay aswell, the block to the chasis.
but as Mazdaspeed7 said check for proper grounding..
not just the ECU but in the engine bay aswell, the block to the chasis.
Thread Starter
Joined: Nov 2002
Posts: 12,752
Likes: 1
From: Laredo, Tx
Originally posted by mazdaspeed7
Dont waste your time replacing the pump. When they start to go bad, you will know it. They get loud, and they start pumping WAY more fuel. Your idle will go to ****, and you will smell a very strong gas smell.
Always replace the consumables before troubleshooting expensive parts that dont fail often.
Have you regrounded the ECU? If not, its worth doing.
Dont waste your time replacing the pump. When they start to go bad, you will know it. They get loud, and they start pumping WAY more fuel. Your idle will go to ****, and you will smell a very strong gas smell.
Always replace the consumables before troubleshooting expensive parts that dont fail often.
Have you regrounded the ECU? If not, its worth doing.
I haven't done the ECU yet. But I guess I will now. :/
Thread Starter
Joined: Nov 2002
Posts: 12,752
Likes: 1
From: Laredo, Tx
Originally posted by mazdaspeed7
Dont waste your time replacing the pump. When they start to go bad, you will know it. They get loud, and they start pumping WAY more fuel. Your idle will go to ****, and you will smell a very strong gas smell.
Always replace the consumables before troubleshooting expensive parts that dont fail often.
Have you regrounded the ECU? If not, its worth doing.
Dont waste your time replacing the pump. When they start to go bad, you will know it. They get loud, and they start pumping WAY more fuel. Your idle will go to ****, and you will smell a very strong gas smell.
Always replace the consumables before troubleshooting expensive parts that dont fail often.
Have you regrounded the ECU? If not, its worth doing.
I haven't done the ECU yet. But I guess I will now. :/
Thread
Thread Starter
Forum
Replies
Last Post
[For Sale] Scratch & Dent, Used, and Open-Box Sale!
SakeBomb Garage
Vendor Classifieds
5
Aug 9, 2018 05:54 PM
The1Sun
1st Generation Specific (1979-1985)
7
Sep 18, 2015 07:13 PM
The1Sun
New Member RX-7 Technical
5
Sep 15, 2015 04:45 PM
The1Sun
1st Generation Specific (1979-1985)
0
Sep 7, 2015 10:21 PM