high idle with ports open?
high idle with ports open?
I have the vdi open and I have both aux ports open with the pineapple inserts. Do you guys think this would cause me to have a high idle? I am also running a haltech.
If your high idle is also rough, possibly a vacuum leak. Check out the post I wrote about checking vac leaks:
https://www.rx7club.com/2nd-generation-specific-1986-1992-17/rx7-rough-idle-diagnosis-simplified-645051/
If the idle is high but smooth, be sure the idle lever on the throttle body is touching the stop screw. If it's not, check the thermowax to see if it's holding the idle up. Also check the dashpot if you have one.
https://www.rx7club.com/2nd-generation-specific-1986-1992-17/rx7-rough-idle-diagnosis-simplified-645051/
If the idle is high but smooth, be sure the idle lever on the throttle body is touching the stop screw. If it's not, check the thermowax to see if it's holding the idle up. Also check the dashpot if you have one.
Thread
Thread Starter
Forum
Replies
Last Post
Skeese
Adaptronic Engine Mgmt - AUS
65
Mar 28, 2017 03:30 PM
msilvia
3rd Generation Specific (1993-2002)
28
Apr 14, 2016 12:58 PM
alphawolff
1st Generation Specific (1979-1985)
17
Nov 17, 2015 05:57 PM