High beam light signal is on. but lights are out. help
#1
Junior Member
Thread Starter
Join Date: Jan 2004
Location: vancouver
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
High beam light signal is on. but lights are out. help
Hey
my high beam light signal is on, but my head lights are out. I am wondering if you guys know whether i'ts a wiring problem or simply my lights are burnt out.
thanks
my high beam light signal is on, but my head lights are out. I am wondering if you guys know whether i'ts a wiring problem or simply my lights are burnt out.
thanks
#2
I'm a boost creep...
Join Date: Jan 2002
Location: Auckland, New Zealand
Posts: 15,608
Likes: 0
Received 8 Likes
on
8 Posts
If the warning light is working then it must be the bulbs. If any other part of the circuit fails the warning light won't work. You can double-check by unplugging the connector from the bulbs and checking for 12V at the red/white wire (with the high-beams switched on) and/or measuring the resistance across the bulbs' high-beam filaments.
Last edited by NZConvertible; 11-15-05 at 02:37 AM.
Thread
Thread Starter
Forum
Replies
Last Post