Hey guys i'm back and need advice!
#1
Senior Member
Thread Starter
iTrader: (7)
Join Date: Jul 2002
Location: Indy, IN
Posts: 532
Likes: 0
Received 0 Likes
on
0 Posts
Hey guys i'm back and need advice!
Ok so i haven't posted in over a yr and half now i believe and its because i got busy with school and the RX wasn't running but School was a priority.
So basically i got her running last thursday but my coolant leak got worse. So Since I am on spring break I am going to get crazy and just rebuild her. I have a Mazda OEM rebuild kit with 3 pc seals.
I am planning on a Bridge port with the s5 turbo and all the supporting mods i have so far.
Can I run a bridge port at 10-11 psi with an SAFC or do I absolutely need to get a stand alone?
If so what stand alone is user friendly, i know the halltech can be tricky what other ones are recommended?
Any adivce help would be great before I pull the motor.
So basically i got her running last thursday but my coolant leak got worse. So Since I am on spring break I am going to get crazy and just rebuild her. I have a Mazda OEM rebuild kit with 3 pc seals.
I am planning on a Bridge port with the s5 turbo and all the supporting mods i have so far.
Can I run a bridge port at 10-11 psi with an SAFC or do I absolutely need to get a stand alone?
If so what stand alone is user friendly, i know the halltech can be tricky what other ones are recommended?
Any adivce help would be great before I pull the motor.
Thread
Thread Starter
Forum
Replies
Last Post