2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

help!!!! where does this go???

Thread Tools
 
Search this Thread
 
Old Feb 1, 2003 | 01:01 AM
  #1  
astrochild7's Avatar
Thread Starter
controlled kaos
Tenured Member 20 Years
iTrader: (3)
 
Joined: Nov 2002
Posts: 908
Likes: 1
From: eugene, or
help!!!! where does this go???

can't remember where the vacuum line off of the pressure regulator goes(solenoid rack pulled).... Also found small black wire broken.... this small black wire comes out of the wire loom down by the starter/ oil pressure sending unit. it comes out of the bundle of wires then it goes to a connector....... pictures here.
Reply
Old Feb 1, 2003 | 10:38 AM
  #2  
Icemark's Avatar
Former Moderator. RIP Icemark.
 
Joined: Apr 2001
Posts: 25,896
Likes: 24
From: Rohnert Park CA
solid black is ground under the hood.

But I don't know exactly what wire that is... need a picture pulled further back. It almost looks like the oil pressure sender wire.

Reply
Old Feb 1, 2003 | 04:17 PM
  #3  
pengarufoo's Avatar
The mystery of the prize.
Tenured Member 05 Years
 
Joined: Aug 2002
Posts: 832
Likes: 2
From: Bay area
that looks like the wire/plug that comes off of the oil temp sender in the pan. I think they often break off during installation from getting caught on something.
Reply
Old Feb 1, 2003 | 04:54 PM
  #4  
astrochild7's Avatar
Thread Starter
controlled kaos
Tenured Member 20 Years
iTrader: (3)
 
Joined: Nov 2002
Posts: 908
Likes: 1
From: eugene, or
no that one's plugged in..... but i did figure it out i think????? when i pulled my power steering pump i cut the wire that went to that.. i think that was it .
Reply




All times are GMT -5. The time now is 05:26 AM.