2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

Help-turn Signals-hi/lo Dont Work

Thread Tools
 
Search this Thread
 
Old Mar 10, 2005 | 08:29 AM
  #1  
digio's Avatar
Thread Starter
Newbie
 
Joined: Mar 2005
Posts: 2
Likes: 0
From: PENNSYLVANIA
Unhappy Help-turn Signals-hi/lo Dont Work

If Any One Has Any Input I Replaced A Headlight Switch In My 87 And The Harness Cause I Had No Parking Lights, The Hi /lo And The Signals Worked Befor I Did The Replacement When I Was Finished The Signals Worked For A Few Seconds And Stopped What Could Be Wrong ? Any Hidden Fused Wires Etc. The Manual Doesnt Say Much Other Than The Norm Of Your 15-20 Amp Fuses Etc, I Have Parking Lights And Low Beams now. Thanks Guys .........................................
Reply
Old Mar 10, 2005 | 08:56 AM
  #2  
RexRyder's Avatar
Rotary Freak
Tenured Member: 20 Years
iTrader: (11)
 
Joined: Dec 2001
Posts: 2,965
Likes: 6
From: Tucson
yea there fuses under the dash, drivers side. and under the hood.
Reply
Old Mar 10, 2005 | 12:44 PM
  #3  
Icemark's Avatar
Former Moderator. RIP Icemark.
 
Joined: Apr 2001
Posts: 25,896
Likes: 24
From: Rohnert Park CA
where did you get the replacement harness?.. it sounds like you have the wrong year.

If you have a S4 you need a S4 light harness, if you have a S5, you must have S5 light harness.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
maikelc
3rd Generation Specific (1993-2002)
8
Aug 24, 2015 11:04 AM




All times are GMT -5. The time now is 07:47 PM.