2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.
Sponsored by:

help,plz,,,, ?fuel Pres.Regulator? smoke at cold start- then normal

Thread Tools
 
Search this Thread
 
Old 09-19-05, 12:44 PM
  #1  
Junior Member

Thread Starter
 
jdsrx's Avatar
 
Join Date: Oct 2003
Location: Utah
Posts: 6
Likes: 0
Received 0 Likes on 0 Posts
help,plz,,,, ?fuel Pres.Regulator? smoke at cold start- then normal

have 2 problems,,,,,
--occured 2 0f 4 times,,,simultaneously---
1- both times has gas trail during downhil- reverse from garage,,looks like puddle under F.P. Regulator-----I replaced regulator and all fuel lines w/ hi-pressure 1 year ago......
2- smoke at cold start,,heavy- light color,,,,,sounds like missing and loaded-up----I run at 2500 r til smoke eventually stops (at temerature) then runs like normal.
""MAY BE OX SENSOR , parts guy""
---have new F.P.Regulator ordered-------is there something i may be missing???

Thanks,
Jim
Old 09-19-05, 01:52 PM
  #2  
Rotary Freak

iTrader: (1)
 
socalrotor's Avatar
 
Join Date: Mar 2003
Location: southbay
Posts: 2,839
Likes: 0
Received 0 Likes on 0 Posts
fuel pusation dampner will leak @ same location as FPR check that. I just changed my hommies FPD and he had the same problems as you....ie smoke, and loaded up after it sat. Try that first IMO also might want to check to see if the sparkplugs look fouled. If the plugs all look close to the same then the injectors are ok,but if the plugs from one of the rotors looks like massive carbon you might have a leaky injector in that rotor hope this helps ya.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
stickmantijuana
Microtech
30
04-23-16 06:37 PM
86glxNA
New Member RX-7 Technical
7
08-22-15 08:54 PM
befarrer
2nd Generation Specific (1986-1992)
4
08-14-15 04:18 PM
Wolf_
Single Turbo RX-7's
3
08-11-15 04:23 PM



Quick Reply: help,plz,,,, ?fuel Pres.Regulator? smoke at cold start- then normal



All times are GMT -5. The time now is 02:45 PM.