I've heard this a thousand times. I've searched for the answer. nothing.

I swapped out my deck and now my gauge cluster wont illuminate. I know someone knows how to help me..
Could you please pm me the answer?

 

Covered in the FAQ for FC.

You wired the radio wrong or didn't cap off the red/black (lumination wire) behind the radio. Hopefully you didn't use the red/black as ground and burn up the light switch, but if the parking lights work and the dash lights don't; well... then you burned up the light switch as well.

 

no my parking lights don't work.
Is this going to be a quick fix?

 

look at the FAQ, get it wired properly, and change the switch(relay??)

couldnt take more than a couple of hours

 

then you probably blew the fuse.

fix the wiring, put a new fuse in and be done with it.

and why are you so lame that you must bump to hear that answer??/

Bumps are forbidden here in the 2nd gen tech section. Your bump has been deleted.

 

good to know mark!