Help a noob with the diff !
#1
Junior Member
Thread Starter
Join Date: Dec 2010
Location: Spanaway, WA
Posts: 30
Likes: 0
Received 0 Likes
on
0 Posts
Help a noob with the diff !
i got a 1990 rx7 vert. went to take the diff out. everything is un bolted that i can see clearly getting hung up.. called a rx7 guy and he says i have to lower the sub frame.
where should i start and what all has to be disconnected and what doesnt have too. 1st rx7 and im trying. any help is appreciated.
thanks in advanced. yes im a noob.
where should i start and what all has to be disconnected and what doesnt have too. 1st rx7 and im trying. any help is appreciated.
thanks in advanced. yes im a noob.
#4
Junior Member
Join Date: Jan 2011
Location: Orlando, FL
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
I didn't drop the subframe. I remove the studs from the front of the diff and wrestled it out. It was a bit of a pain, perhaps it would have been quicker to drop the sub.
#5
Slowpoke
iTrader: (3)
unbolt the struts and rear brake calipers, i tend to ziptie the calipers up to teh shocks so they dont hang from the brake lines. Put a floor jack under the subframe, then unbolt the 2 main subframe bolts and the 2 support brackets next to them and lower it down with the floor jack.
Oh yeah, remove your exhaust too..
Oh yeah, remove your exhaust too..
Thread
Thread Starter
Forum
Replies
Last Post