2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

Help Me Set My FPR

Thread Tools
 
Search this Thread
 
Old Jun 21, 2015 | 11:16 AM
  #1  
R-X-R's Avatar
Thread Starter
Rotary Enthusiast
Tenured Member 05 Years
iTrader: (9)
 
Joined: Jun 2011
Posts: 805
Likes: 4
From: Syracuse,NY
Arrow Help Me Set My FPR

I need to know whats the ideal fuel pressure for my fc.
s5 t2
720cc/1600cc - 340lph -6an line parallel
15psi - gt35r - 350rwhp
stock port
idles at 1900rpm
right now the fuel pressure is at 40psi at idle. when I bounce the key on and off the fuel pressure is at 35psi.
is this good or should I bump it higher?

Last edited by R-X-R; Jun 21, 2015 at 11:19 AM.
Reply
Old Jun 21, 2015 | 12:33 PM
  #2  
Evil Aviator's Avatar
Rotorhead
Tenured Member 15 Years
 
Joined: Feb 2001
Posts: 9,136
Likes: 39
From: Charlottesville, Virginia, USA
Originally Posted by R-X-R
720cc/1600cc
Aftermarket fuel injectors are typically rated at 3bar (43.5psi) so you need to run them at this fuel pressure in order to yield their advertised static flow rate. I don't see anything wrong with 40psi as long as it produces enough fuel for the engine and the fuel injectors are below 80% duty cycle. Most fuel injectors can run up to 4bar (58psi) before injector life and spray patterns are adversely affected.

Originally Posted by R-X-R
stock port
idles at 1900rpm
Um, what?
Reply
Old Jun 21, 2015 | 01:56 PM
  #3  
R-X-R's Avatar
Thread Starter
Rotary Enthusiast
Tenured Member 05 Years
iTrader: (9)
 
Joined: Jun 2011
Posts: 805
Likes: 4
From: Syracuse,NY
well, I had an idle issue where my car dies at stop light. so adjusted the dash pot. now it stays at 1900rpm. rather have idle that die at stop light lol.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
Jul 1, 2023 04:40 PM




All times are GMT -5. The time now is 05:29 PM.