2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

help me

Thread Tools
 
Search this Thread
 
Old Feb 16, 2008 | 02:20 PM
  #1  
ecr7's Avatar
Thread Starter
Junior Member
 
Joined: Dec 2007
Posts: 39
Likes: 0
From: Canton Georgia
help me

ok i got the intake back on my car and started it and it ran fine until it started warm up then it started to smake a little bit from the motor and out the exhuast. its white some and when it started smoking it started to idle rough just like bouncing any ideas?
Reply
Old Feb 16, 2008 | 03:32 PM
  #2  
w0ppe's Avatar
CC of L-Squared Shots
Tenured Member: 20 Years
 
Joined: Oct 2003
Posts: 644
Likes: 0
From: Columbus, Ohio
Worn coolant seals perhaps. Coolant burns a white if it gets into the chamber. The result? You're going to need a rebuild soon... Tip: Make sure you didn't spill any coolant if you filled it up recently. The fluid tends to glide down the Thermoneck, onto your airpump and run along side the Exhaust manifold. That'll cause a lot of white smoke as well.
Reply
Old Feb 16, 2008 | 04:05 PM
  #3  
blwn rtr 89''s Avatar
Banned. I got OWNED!!!
iTrader: (5)
 
Joined: May 2007
Posts: 629
Likes: 0
From: Americas High Five
try doing a coolant system pressure check, if you steadily loose pressure from 15 psi you have a leak, if you cant see coolant leaking on the ground, you probably will need a rebuild soon.
Reply
Old Feb 16, 2008 | 07:40 PM
  #4  
ecr7's Avatar
Thread Starter
Junior Member
 
Joined: Dec 2007
Posts: 39
Likes: 0
From: Canton Georgia
ok ill do that, how much is the kit i heard you could rebuild one pretty easy is that true
Reply




All times are GMT -5. The time now is 09:36 PM.