2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.
Sponsored by:

Help igniter and coil t2, doesn't start

Thread Tools
 
Search this Thread
 
Old 02-01-07, 01:08 AM
  #1  
Senior Member

Thread Starter
 
bluemunkey1820's Avatar
 
Join Date: May 2005
Location: reno nv
Posts: 337
Likes: 0
Received 0 Likes on 0 Posts
Unhappy Help igniter and coil t2, doesn't start

So, I have an 88 t2 and it was running fine, then all of a sudden it got very hard to start. Now the car won't start at all and it's not flooded and the plugs are not fowled, but the plugs I removed were, I just went out and got new ones today. I'm thinking it's a spark problem cause as I crank on the engine, I see a bit of smoke coming out of the tail pipes, but it doesn't start. I have checked the OMS on the low voltage side of the coils and they are well under 1 OME, and I'm thinking it may be on the high voltage side, but I don't know how to check that side. I would also like to know how to check the igniters as I now have a spare set I might try to swap in. Any help would be appreciated, as I'm at my wits end.


In the AM I'm goin to do a compression check and timing check. Is there anything else I should do?
Old 02-01-07, 02:35 PM
  #2  
Senior Member

Thread Starter
 
bluemunkey1820's Avatar
 
Join Date: May 2005
Location: reno nv
Posts: 337
Likes: 0
Received 0 Likes on 0 Posts
compression check and timing check are done and all good !!!!!help!!!!!
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
LunchboxSA22
2nd Generation Specific (1986-1992)
37
10-26-15 10:53 AM
PhillyFC
General Rotary Tech Support
9
08-21-15 06:36 PM
freq
2nd Generation Specific (1986-1992)
0
08-21-15 03:30 PM



Quick Reply: Help igniter and coil t2, doesn't start



All times are GMT -5. The time now is 05:53 PM.