Help Asap
#1
Junior Member
Thread Starter
Join Date: Jan 2005
Location: union city
Posts: 28
Likes: 0
Received 0 Likes
on
0 Posts
Help Asap
my speedometer not working(just recenlty baught my car) i was driving it and there was somethings hanging out of the tranny and my speedmeter didnt work and i put it back in and it still didnt work...how do i fix or make it work again..and another thing..how do i make my heater work again..its not working for some reason..i dont know why..it did work until i stalled and after that it didnt....HELP ASAP
#2
Rotor Head
Join Date: Jan 2002
Location: British Columbia
Posts: 1,966
Likes: 0
Received 0 Likes
on
0 Posts
Make sure the cable is plugged into the rear of the instrument cluster. If it is not... plug it in and it should work. or the cable is broken. Replace the cable.
#3
Junior Member
Thread Starter
Join Date: Jan 2005
Location: union city
Posts: 28
Likes: 0
Received 0 Likes
on
0 Posts
how do i replace and were and what do i replace
Originally Posted by DC350
Make sure the cable is plugged into the rear of the instrument cluster. If it is not... plug it in and it should work. or the cable is broken. Replace the cable.
#4
BWAAA
Join Date: Jan 2004
Location: sofla-this isnt naxxramas
Posts: 1,167
Likes: 0
Received 0 Likes
on
0 Posts
follow the cable from the gauge cluster, if u follow it correctly it will go all the way underneath your car into the tranny, or drivetrain whatever you want to call it
sometimes its the cable, sometimes its the little gear thing that the wire is connected to, mine was the cable, so i went to the local junkyard and picked one up for 5$ :-D, if u need a new guage cluster, sometimes the speedo breaks too, i have an extra one if u want
sometimes its the cable, sometimes its the little gear thing that the wire is connected to, mine was the cable, so i went to the local junkyard and picked one up for 5$ :-D, if u need a new guage cluster, sometimes the speedo breaks too, i have an extra one if u want
#5
*** i love duct tape
Join Date: Jan 2005
Location: tennessee
Posts: 396
Likes: 0
Received 0 Likes
on
0 Posts
and another thing..how do i make my heater work again..its not working for some reason..i dont know why..it did work until i stalled and after that it didnt....HELP ASAP
does the heater come on at all and just not put out any heat? or does it not turn on at all.
#6
Junior Member
Thread Starter
Join Date: Jan 2005
Location: union city
Posts: 28
Likes: 0
Received 0 Likes
on
0 Posts
the heatr doesnt evn come on..and its such an *** when my windows are all foggy. esp on rainy days..i alwayz have 2 open my windows...help plz
Originally Posted by neu
uhh a little more info on that might be handy... get a haynes manual, or download the FSM (factory service manual) unless you want to provide a little more info about the problem...
does the heater come on at all and just not put out any heat? or does it not turn on at all.
does the heater come on at all and just not put out any heat? or does it not turn on at all.
#7
Passing life by
ok the speedo. its itehr cable or gear in trany as they said. a dyno calibration shop can test it and make it the right ratio incase u changed tiers or rims. the cable goes from the insterment cluster therew the firewall to the tranny. "this has allready ben said so i just repeated it ayways"
ok heater. in the morning is your windows fogy? or fog residu on the lower part of the windshield. this is du to a bad heater core or one with a leek it should be up under the dash on the passenger side beside the blower. this is generaly hte reson it dosent work the other is your engin is cold and there is no heat lol. check your thermostat is it stuck?
ok heater. in the morning is your windows fogy? or fog residu on the lower part of the windshield. this is du to a bad heater core or one with a leek it should be up under the dash on the passenger side beside the blower. this is generaly hte reson it dosent work the other is your engin is cold and there is no heat lol. check your thermostat is it stuck?