help again
03-11-04, 06:21 PM
#1
Senior Member
Thread Starter
Join Date: Apr 2003
Location: columbus ohio
Posts: 396
Likes: 0
Received 0 Likes
on
0 Posts
help again
ok if you rember i posted on here about he heather prob i had. so i took your advice and .........
i replaced the blower ---
i got new logicon hooked it up and tried it out without starting engine. at the time it was able to swith from feet to head and as and blablablaaaaaaaa. i put all the plastic pieces back on dash and all that **** and turned the car on and still nothing was able to be adjusted the speed that is. but now i cant even switch from feel to defog to head and so on. i can steel hear it click down by the blower but nothing,.
the fuse down by the driver side, should be the red thing popping up when its blown right? well its not. so im assuming the fuse is good. if it was bad how do i get it out?
so now having replaced the logicon and blower what else could ti be? i only know of one fuse and thats the one in the main fuse box.
please someon help. i spent a 100 bucks already and nothing has helped.
i replaced the blower ---
i got new logicon hooked it up and tried it out without starting engine. at the time it was able to swith from feet to head and as and blablablaaaaaaaa. i put all the plastic pieces back on dash and all that **** and turned the car on and still nothing was able to be adjusted the speed that is. but now i cant even switch from feel to defog to head and so on. i can steel hear it click down by the blower but nothing,.
the fuse down by the driver side, should be the red thing popping up when its blown right? well its not. so im assuming the fuse is good. if it was bad how do i get it out?
so now having replaced the logicon and blower what else could ti be? i only know of one fuse and thats the one in the main fuse box.
please someon help. i spent a 100 bucks already and nothing has helped.
03-11-04, 06:25 PM
#2
Lives on the Forum
Dude, if you can't troubleshoot with a meter and wiring schematic, find a buddy that can (offer beer- that always works LOL)...Otherwise you're just wasting your money changing perfectly good parts...good luck...
03-11-04, 06:39 PM
#3
Former Moderator. RIP Icemark.
did you replace the blower amp as well (its the balck box on the back of the Logicon)???
I would also check the blower resistor (on the blower motor).
I would also check the blower resistor (on the blower motor).
03-11-04, 09:02 PM
#4
Senior Member
Thread Starter
Join Date: Apr 2003
Location: columbus ohio
Posts: 396
Likes: 0
Received 0 Likes
on
0 Posts
i got a hole unit logicon that is that came with all the wires and so on. with the black box attached to it. not im hoping thats what you are talking about.
next the little black fuse box you talking about by the blower that hase the wire in it? hmmmmmmm how do i know if its bad? looked at it but it seemed to be in tact.
like i said i can hear the clicking sound by the blower so i was assuming it was getting power there . but i guess its not.
anyone esle have some great input before i got the shop?
thanks again
andy
next the little black fuse box you talking about by the blower that hase the wire in it? hmmmmmmm how do i know if its bad? looked at it but it seemed to be in tact.
like i said i can hear the clicking sound by the blower so i was assuming it was getting power there . but i guess its not.
anyone esle have some great input before i got the shop?
thanks again
andy
03-12-04, 10:49 AM
#7
Senior Member
Thread Starter
Join Date: Apr 2003
Location: columbus ohio
Posts: 396
Likes: 0
Received 0 Likes
on
0 Posts
no ones up to the challenge huh? even for money. i guess i have no alternative but to go to the shop. sence no one has replied im assuming we are all stump at this point about the prob im having.thanks again
again if anyone is up to the challenge let me know.
andy
again if anyone is up to the challenge let me know.
andy