Hi all ive got a problem with my rx7. i recently sent my engine off to be rebuilt it has arrived back a week ago and is reinstalled. the problem is it wont start i have been over and over it again and cant see the problem i thought at first it might be a vacuum problem so i emailed kev at rotary resurrection, he suggested i do what he does and remove all vac hoses and do it the way he does so i done this with the detailed instructions. so so i done it still nothing compression is good alot better that before anyway all the plugs are sparking fuel is getting into the system but its not firing at all all the electrics that are still on are fine and live no leaks anywere but it just turns over and over any ideas cheers guys

 

please use real titles when posting, that actually describe the problem.

Do you have fuel getting into the motor?

Do you have spark???

You say you do, but what did you test? Have you checked the CAS?

 

make sure your CAS is stabbed correctly! If you have vacuum leaks the car will still start, it just might not hold an idle.

 

pulled spark plus out and tested them that way yeah fuel definetly gettin into motor plugs were damp with petrol when i took them out and have checked cas its in properly