Help
#1
gurgii08
Thread Starter
Join Date: Sep 2004
Location: Toronto, Ontario
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
Help
OK. i have a major probelm ... basically one day i was driving home and all this smoke was coming from my engine so as soon as i get home i pop the hood and i see thats thiers hardl any coolant so i fill her up and im like ok hoepfull shes good .... and the next day i changed my thermostate and did a full coolant flush... start her up and 10 min later hes over heating again like crazy... i look at my headers beat red! do you guys have any clues to what it is .. maybe the water pump or the rad?
#2
Junior Member
Join Date: Jul 2003
Location: Austin, Tx
Posts: 23
Likes: 0
Received 0 Likes
on
0 Posts
Sounds like coolant seal, the oring between the layers of the block. These motors don't take well to overheating so beware. There is a repair that doesn't require teardown and may work for you it did for my 88 na, see rotary resurrection .com , tech-coolant seal fix. Good luck
#3
my did almost the same thing but i could drive it for a half hour before the temp would start to climb into unsafe levels. I just took my motor apart and found that the water jacket had broken off. That was the cause of my problems.