2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

Help

Thread Tools
 
Search this Thread
 
Old Jun 17, 2004 | 04:56 PM
  #1  
killinfoo666's Avatar
Thread Starter
Junior Member
Tenured Member 05 Years
 
Joined: Apr 2003
Posts: 17
Likes: 0
From: us
Help

I just finished replacing the main injectors.

I replaced the secondary ones a week ago and the car ran fine.
now the car will start and run fine but after a couple of minutes the idle will drop and the car will stall.

I can keep it running by pressing the gas and it runs and revs fine.
I tried to adjust the idle but it doesnt seem to affect anything.

help......

also I installed the rb headers and it says to block off the ACV with the included plate. Is that necessary?? i haven't done it yet cause I had to take it in for emissions testing...

thanks in advance.
Reply
Old Jun 17, 2004 | 06:42 PM
  #2  
J-Rat's Avatar
Alcohol Fueled!
Tenured Member 20 Years
iTrader: (2)
 
Joined: Jan 2002
Posts: 11,093
Likes: 2
From: Hood River oregon
I would venture to say you have a vac leak somewhere..
Reply




All times are GMT -5. The time now is 06:00 AM.