Hello RX-7 club! Well, i have mostly been using this forum as a tool and its been pretty helpful till about now. I have a 90 GTU that i dropping a TII engine and tranny into. My problem is there was only one mount on the JDM TII engine i purchased, and the exhaust manifold seems to be where it should mount up. The other mount lines up fine. But it seems like theres no place to bolt a second mount onto this engine. So i sorta stuck. If anyone has had this problem or can post some pics of mounts on a 89-91 TII engine i would be very appreciative. Also when i bought the engine the sent me the TII ECU (which i don't need because im goign with a haltech EMS) so if anyone wants it email me and we can talk about a price. Ill post some pics of the mountless location later.

 

id help if i had a t2 swap already done, good luck

 

Which mount? Left front? Right front? Or the transmission mount that is different on the turbo vs the non turbo?

 

Why dont you just get the mount that is missing? Follow the FSM diagram or go to a Mazda Dealer to give you a diagram.

 

you are missing the mount and the bracket that mounts to the engine just swap yours over.
With the bracket off it would look like there was no where to put the mount.

 

its the front right engine mount. I do ahve the extra mounts from my old engine, but it looks like the mount needs to go where the turbo on the engine is.

 

it should connect under the engine. you can see where it goes in the shape of the oil pan.

 

yeah .. the right mount goes THROUGH the oil pan ....

 

Good News, i Figured it out. The right hand mount mounts under the oil pan where are the left mounts to te side of the engine. I should have known it wouldn't be symetrical.

 

Oh this is good stuff. Sorry I can't help it.