2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

heater problems =(

Thread Tools
 
Search this Thread
 
Old Oct 18, 2006 | 10:56 PM
  #1  
oretome's Avatar
Thread Starter
Junior Member
Tenured Member 05 Years
 
Joined: Jul 2006
Posts: 7
Likes: 0
From: Seattle, Washington
heater problems =(

i pushed the heater to blow to my face, but after that it wont change to my legs or back to the windshield! the buttons were pushed but it still blew to my face only. please help, i dont wanna buy parts that will be useless to this problem.
Reply
Old Oct 19, 2006 | 08:09 AM
  #2  
nopistons's Avatar
Senior Member
Tenured Member 10 Years
 
Joined: Oct 2001
Posts: 691
Likes: 0
From: new jersey
It's likely one of two things. Either the Logicon (the control with all the buttons that select where the air comes out) is bad, or, there is a bad contact in the ignition switch which controls some relays behind the dash, one of which controls the Logicon. With the engine running, try wiggling the ignition switch back and forth, but not enough to turn off the engine. If you hear a quiet click from behind the dash when you do this, the Logicon should then work OK. Try it several times. I had the same problem with my car. It's a common problem on 2nd gen cars. Also, see if your sunroof works before you try wiggling the ignition switch. Usually, when the problem is with the ignition switch, it also kills the power to the sunroof, so that's a giveaway as to where the problem is.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
The1Sun
1st Generation Specific (1979-1985)
7
Sep 18, 2015 07:13 PM
The1Sun
New Member RX-7 Technical
5
Sep 15, 2015 04:45 PM
Hipsiguy
Introduce yourself
6
Sep 14, 2015 05:25 PM
risingsunroof82
1st Generation Specific (1979-1985)
8
Sep 7, 2015 01:11 PM




All times are GMT -5. The time now is 03:33 AM.