heater hose blown**help!!!!
#1
Full Member
Thread Starter
Join Date: Oct 2003
Location: Naugatuck, Connecticut
Posts: 56
Likes: 0
Received 0 Likes
on
0 Posts
heater hose blown**help!!!!
Quick story- I tried an e-fan setup, but it didn't work because I needed a shroud. I went back to stock fan setup, reinstalled stock shroud, but overheated today and blew heater hose under oil filter. I pulled over quick and was towed home by AAA.
Did I damage my engine?
How can I tell?
How Do I replace hose and make engine serviceable again?
Why did I overheat?
Fan Clutch bad?
Why didn't it overheat during my ride going but it did coming back?
Did I damage my engine?
How can I tell?
How Do I replace hose and make engine serviceable again?
Why did I overheat?
Fan Clutch bad?
Why didn't it overheat during my ride going but it did coming back?
#2
Rotary Enthusiast
Join Date: May 2006
Location: Vacaville Ca
Posts: 1,081
Likes: 0
Received 0 Likes
on
0 Posts
1. how badly did you overheat it? did it hit the red zone on the temp gauge and for how long?
2. it's a hose, order a new one from the dealer or mazdatrix and put it on.
3. the hose may have formed a small hole before going out? what condition is your cooling system? maybe it clogged and that hose was the weakest link.
4. theres info elsewhere about checking the clutch fan you'll have to search for it
2. it's a hose, order a new one from the dealer or mazdatrix and put it on.
3. the hose may have formed a small hole before going out? what condition is your cooling system? maybe it clogged and that hose was the weakest link.
4. theres info elsewhere about checking the clutch fan you'll have to search for it