Headlight cleaner switch Q's
02-18-12, 07:00 PM
#1
Full Member
Thread Starter
iTrader: (1)
Join Date: Aug 2005
Location: NEBRASKA
Posts: 99
Likes: 0
Received 0 Likes
on
0 Posts
Headlight cleaner switch Q's
I'm trying to figure out how to run the pop-ups by way of the cleaner switch only, so basicly that the headlight could be on just not up. I prefer not to have to run extra switches an other junk to pull this off.
02-18-12, 10:48 PM
#3
Full Member
Thread Starter
iTrader: (1)
Join Date: Aug 2005
Location: NEBRASKA
Posts: 99
Likes: 0
Received 0 Likes
on
0 Posts
Oh I searched. Like for the past two days by way of google, yahoo and on here. I think I found it though. Just to make sure this is it right? https://www.rx7club.com/showthread.p...adlight+switch
Originally Posted by Icemark
Open up the lightswitch, un-solder the main board, remove Diode marked D4, re-assemble the switch.
Then the headlights will not come up, unless you turn the cleaner switch up
Open up the lightswitch, un-solder the main board, remove Diode marked D4, re-assemble the switch.
Then the headlights will not come up, unless you turn the cleaner switch up
