Has anyone removed their ABS using the Mazdatrix kit?
Thread Starter
Powered By Trochoids
Joined: Oct 2004
Posts: 1,457
Likes: 0
From: Philly | PA
Has anyone removed their ABS using the Mazdatrix kit?
My pump is leaking, and Im thinking of getting the kit. Does anyone have any pictures of what the area looks like once its installed?
My car is down because I'm rebuilding the engine, and my ABS pump was leaking too so I ripped it out, but I still haven't ordered anything to reroute the lines. I was going to for the mazdatrix kit, which I thought just looped the line together? but if anyone has more information on this I'd like to know as well.
Thread Starter
Powered By Trochoids
Joined: Oct 2004
Posts: 1,457
Likes: 0
From: Philly | PA
Originally Posted by The Spyder
I did it on a friends car. Looks pretty nasty with all the hoses, its just a Tblock and short 1ft hose.
Seduced by the DARK SIDE
Joined: Apr 2001
Posts: 7,323
Likes: 2
From: Orange Park FL (near Jax)
I used a T for the fronts.
Then I cut the rear line and re-flaired it to connect directly to the proportioning valve.
And without the ABS it's way easier to bleed the brakes!
Just don't bother to tell your insurance company.
Then I cut the rear line and re-flaired it to connect directly to the proportioning valve.
And without the ABS it's way easier to bleed the brakes!
Just don't bother to tell your insurance company.
Last edited by SureShot; Feb 27, 2006 at 01:16 PM.
Thread
Thread Starter
Forum
Replies
Last Post