2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

has anyone heard from rotary evolution ?

Thread Tools
 
Search this Thread
 
Old Sep 8, 2014 | 05:55 PM
  #1  
hsilive's Avatar
Thread Starter
rotory chicken
 
Joined: Mar 2011
Posts: 300
Likes: 0
From: midwest
has anyone heard from rotary evolution ?

Hi I'm just trying to make sure ben is still alive !

Have not heard from him in a bit a I know he had something

else going on its kinda urgent that I speak with him !!

Any help would be appreciated! Thanks all
Reply
Old Sep 8, 2014 | 10:11 PM
  #2  
misterstyx69's Avatar
Retired Moderator, RIP
Tenured Member: 20 Years
iTrader: (142)
 
Joined: Sep 2005
Posts: 25,581
Likes: 136
From: Smiths Falls.(near Ottawa!.Mapquest IT!)
I just sent him an Email and linked this thread.
Hopefully he will either contact me back or post up.
Reply
Old Sep 9, 2014 | 12:56 AM
  #3  
hsilive's Avatar
Thread Starter
rotory chicken
 
Joined: Mar 2011
Posts: 300
Likes: 0
From: midwest
Thank you I'm just kinda worried he is doing me a big favor but haven't been able to get in contact with him for a little while ! Hope he is doing OK
Reply
Old Sep 9, 2014 | 08:27 AM
  #4  
archaphil's Avatar
Rotary Enthusiast
Tenured Member 10 Years
iTrader: (1)
 
Joined: Nov 2012
Posts: 1,102
Likes: 0
From: bloomington, mn
ironically I was going to message him the other day and check in on him. I have not seen him on the board in a bit either and assumed he was swamped. (he is a one man band over there)
Reply
Old Sep 9, 2014 | 11:14 AM
  #5  
roTAR needz fundZ
Tenured Member 15 Years
iTrader: (1)
 
Joined: Aug 2002
Posts: 2,614
Likes: 31
From: Freeland, MI
Something in my memory tells me someone on here ticked him off, i'm not 100% sure, but i remember him getting fairly mad last few posts i saw of his
Reply
Old Sep 9, 2014 | 12:21 PM
  #6  
jjwalker's Avatar
MECP Certified Installer
Tenured Member 05 Years
 
Joined: Feb 2009
Posts: 3,176
Likes: 3
From: Mesquite, TX-DFW
Originally Posted by lduley
Something in my memory tells me someone on here ticked him off, i'm not 100% sure, but i remember him getting fairly mad last few posts i saw of his
I remember that.

He is usually still pretty calm though and will just write someone off and go about his business. I for some reason doubt that such an occurrence would cause his sudden departure.

Anyone tried to call his shop?
Reply
Old Sep 9, 2014 | 06:16 PM
  #7  
hsilive's Avatar
Thread Starter
rotory chicken
 
Joined: Mar 2011
Posts: 300
Likes: 0
From: midwest
Yup just get his vm unfortunately I know he had a few things he needed to take care of as well hopefully he has everything in order now
Reply
Old Sep 17, 2014 | 09:21 AM
  #8  
jjwalker's Avatar
MECP Certified Installer
Tenured Member 05 Years
 
Joined: Feb 2009
Posts: 3,176
Likes: 3
From: Mesquite, TX-DFW
Any update?
Reply
Old Sep 17, 2014 | 04:05 PM
  #9  
hsilive's Avatar
Thread Starter
rotory chicken
 
Joined: Mar 2011
Posts: 300
Likes: 0
From: midwest
Nothing yet no lights on in his shop either though he still looks like he is in biz ! Hope all is well over there
Reply
Old Sep 17, 2014 | 08:14 PM
  #10  
archaphil's Avatar
Rotary Enthusiast
Tenured Member 10 Years
iTrader: (1)
 
Joined: Nov 2012
Posts: 1,102
Likes: 0
From: bloomington, mn
Originally Posted by hsilive
Nothing yet no lights on in his shop either though he still looks like he is in biz ! Hope all is well over there
Any chance you could pop in during business hours and see if he is still kicking? Kinda miss the guy and his abundance of knowledge.
Reply
Old Sep 18, 2014 | 10:11 PM
  #11  
hsilive's Avatar
Thread Starter
rotory chicken
 
Joined: Mar 2011
Posts: 300
Likes: 0
From: midwest
I'm not in Vegas anymore and yes he is one of the few on here who knows how to get stuff done right
Reply
Old Sep 19, 2014 | 01:39 PM
  #12  
slitherz90gxl's Avatar
Resident Rotard
Tenured Member 05 Years
 
Joined: May 2009
Posts: 908
Likes: 0
From: Belleville, Illinois
Originally Posted by jjwalker
I remember that.

He is usually still pretty calm though and will just write someone off and go about his business. I for some reason doubt that such an occurrence would cause his sudden departure.

Anyone tried to call his shop?
Yeah, I doubt that something like that would bother him for very long. I've seen him put up with much worse. Hopefully all is well, I was going to contact him about my build too.
Reply
Old Oct 21, 2014 | 08:54 AM
  #13  
jjwalker's Avatar
MECP Certified Installer
Tenured Member 05 Years
 
Joined: Feb 2009
Posts: 3,176
Likes: 3
From: Mesquite, TX-DFW
So...any updates?
Reply
Old Oct 21, 2014 | 09:38 AM
  #14  
MickeytFC's Avatar
Knowledge seeker
Veteran: Air Force
Tenured Member: 10 Years
iTrader: (1)
 
Joined: May 2014
Posts: 183
Likes: 3
From: New Mexico
I tried contacting them for work a couple months back. Not a single response.
Reply
Old Oct 21, 2014 | 10:28 AM
  #15  
satch's Avatar
Moderator
Tenured Member: 20 Years
iTrader: (1)
 
Joined: Jun 2005
Posts: 11,738
Likes: 16
From: tulsa,ok.
He must be taking care of some personal issues in one way or another. The last time he logged on was July 29th.
Reply
Old Oct 21, 2014 | 11:06 AM
  #16  
roTAR needz fundZ
Tenured Member 15 Years
iTrader: (1)
 
Joined: Aug 2002
Posts: 2,614
Likes: 31
From: Freeland, MI
Hope that all is well with him
Reply
Old Nov 17, 2014 | 06:57 PM
  #17  
hsilive's Avatar
Thread Starter
rotory chicken
 
Joined: Mar 2011
Posts: 300
Likes: 0
From: midwest
Still no word from him is anyone in his area ?
Reply
Old Nov 17, 2014 | 10:31 PM
  #18  
w0ppe's Avatar
CC of L-Squared Shots
Tenured Member: 20 Years
 
Joined: Oct 2003
Posts: 644
Likes: 0
From: Columbus, Ohio
The last I heard was from some personal friends of his and mine from after we got back from his place in Vegas. There was quite a lot going on actually at that time on all levels.
Reply
Old Nov 17, 2014 | 11:16 PM
  #19  
motoron's Avatar
Full Member
Tenured Member: 10 Years
 
Joined: Apr 2013
Posts: 91
Likes: 0
From: Barstow
has anyone heard from rotary evolution ?

He is in the process of moving to Florida.
Reply
Old Nov 18, 2014 | 05:57 PM
  #20  
hsilive's Avatar
Thread Starter
rotory chicken
 
Joined: Mar 2011
Posts: 300
Likes: 0
From: midwest
I'm having trouble getting in touch with him and he has my engine could anyone find out if he has a new number and pm it to me I believe he has been paid in full just a little concerned since I haven't heard from him in months
Reply
Old Nov 29, 2014 | 08:57 AM
  #21  
SSRat's Avatar
Almost Famous
Tenured Member 05 Years
 
Joined: Aug 2010
Posts: 94
Likes: 0
From: Virginia
heres what hes been up to, sorry. You can try to pm him or post there.

https://www.rx7club.com/group-buy-pr...t-kits-970000/
Reply
Old Nov 29, 2014 | 09:40 AM
  #22  
Jaiyurai's Avatar
Endure Persevere Succeed
Tenured Member: 20 Years
iTrader: (30)
 
Joined: Apr 2005
Posts: 1,693
Likes: 37
From: Berkeley, CA
Not the same forum member...

He's looking for Ben.
RX7Club.com - View Profile: RotaryEvolution
Reply
Old Jan 31, 2015 | 04:52 PM
  #23  
hsilive's Avatar
Thread Starter
rotory chicken
 
Joined: Mar 2011
Posts: 300
Likes: 0
From: midwest
OK 100 bux to anyone who can get me in direct contact with Ben ! I will pay by PayPal ! I am totally serious !!!
Reply
Old Jan 31, 2015 | 08:15 PM
  #24  
jjwalker's Avatar
MECP Certified Installer
Tenured Member 05 Years
 
Joined: Feb 2009
Posts: 3,176
Likes: 3
From: Mesquite, TX-DFW
Originally Posted by hsilive
OK 100 bux to anyone who can get me in direct contact with Ben ! I will pay by PayPal ! I am totally serious !!!
I am fearing the worst may have happened
Reply
Old Jan 31, 2015 | 10:22 PM
  #25  
motoron's Avatar
Full Member
Tenured Member: 10 Years
 
Joined: Apr 2013
Posts: 91
Likes: 0
From: Barstow
Originally Posted by hsilive
OK 100 bux to anyone who can get me in direct contact with Ben ! I will pay by PayPal ! I am totally serious !!!
Do you have a problem with Ben? He is still in LasVegas.

PM me otherwise.
Reply



All times are GMT -5. The time now is 12:33 AM.