has anyone done a LED conversion on their dash?
11-13-05, 04:12 PM
#1
Senior Member
Thread Starter
Join Date: Sep 2005
Location: Michigan
Posts: 261
Likes: 0
Received 0 Likes
on
0 Posts
has anyone done a LED conversion on their dash?
i was just wondering if anyone has changed their bulbs in their dash to LED's. I was thinking about doing this, but i just wanted to see if anyone else has done it.
11-13-05, 04:22 PM
#2
Rotary Enthusiast
Yes, I've done it. I've posted a write-up a few years ago. You just need the LEDs and resistors to get the voltage down to three-four volts. Changed the instrument cluster, logicon, and glove box. Also added illumination to the sunroof buttons.
11-13-05, 04:26 PM
#5
Rotary Enthusiast
It turned out fine. The only drawback was that the needles on the gauges in the cluster aren't lit or show up well. But I've driven the car at night and can see the readings fine.
The writeup is still here, but there are no pics anymore. Just do a search.
The writeup is still here, but there are no pics anymore. Just do a search.
Thread
Thread Starter
Forum
Replies
Last Post
pfsantos
2nd Generation Specific (1986-1992)
1
09-30-15 01:29 PM
