2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

Hardware

Old May 22, 2012 | 09:01 AM
  #1  
kborro01's Avatar
Thread Starter
Senior Member
Tenured Member 10 Years
iTrader: (3)
 
Joined: May 2007
Posts: 316
Likes: 0
From: San Diego
CA Hardware

Does anyone know if a complete hardware list exists? I'm not talking about one that identifies what hardware was used to build the car, but where the hardware goes. If you look through the parts manual, you will see 20 different part numbers for the same 10mm bolt. Everywhere it's used on the car, it has a different part number. I'm looking for a parts list that says this 10mm bolt is used in the following 10 loacations. I'm trying to build a list to post, but if one already exists, yahoo!
Reply
Old May 22, 2012 | 09:03 AM
  #2  
SirCygnus's Avatar
whats going on?
Tenured Member 20 Years
iTrader: (1)
 
Joined: Mar 2004
Posts: 4,930
Likes: 8
From: atlanta ga
its in the archives.

a lot of the bolts will work all over the place. some will need to be cut down and whathaveya, but the list is in the archives, and you can go to fastenol to get the ****. ps, hex head bolts are ****. dont use them.
Reply
Old May 22, 2012 | 09:40 AM
  #3  
Aaron Cake's Avatar
Engine, Not Motor
Tenured Member: 20 Years
iTrader: (1)
 
Joined: Feb 2001
Posts: 29,798
Likes: 128
From: London, Ontario, Canada
If you just pick up an assortment of M6 and M8 bolts in some of the standard sizes you'll be set.
Reply


Thread Tools
Search this Thread

All times are GMT -5. The time now is 02:12 AM.